Constructed of corrosion resistant 17-4 (spring) stainless each shaft is hand-tuned for alignment then heat- treated for maximum hardness to reduce flex and provide optimum energy transfer. OEM shafts for JBL, A.B. Biller , Riffe and Alexander mechanisms are milled to spec for a perfect fit and function. Adapt-A-Shafts are threaded on both ends and accept 303 stainless adapters allowing you to customize length for just about any speargun mechanism available.

|
|
Manufacturer |
Diameter |
Models |
| JBL |
9/32" |
All Models |
| A.B. Biller | 5/16" | 24 Special, 24 LTD, 32 Special, 36 Special, 42 Special, 42 LTD, 48 Special, 48 LTD, 54 Custom, 60 Custom (all with 6mm thread) Freeshaft 60" (with 5/16"-24 thread) |
| Mares | 9/32" | Cyrano 550, 700, 850, 970, 1100 (all with 6mm thread) |


Ansel Taft says:
Hey JBL,
I like the look of the new website… but you took away the product description page(s) for the individual items (such as the spearguns). The new design has *less* functionality and information than before. Not good! I needed the help of your site before I bought my new Explorer 20. I would strongly recommend adding the individual product upsell pages back in.
Thanks,
Ansel
JBL Hunter says:
Ansel,
Thanks for your patience on the website. As you can tell we are still under construction and are currently adding new specs to the pages. Please stay tunned as we should be up and running very shortly.
Overkillphil says:
I have a Sawed Off Magnum XHD, and I love it! Is there a skinnier shaft that will fit my gun? Will any 5/16 shaft work? Are you going to offer a tahitian flopper style shaft for your guns?
JBL Hunter says:
Overkillphil,
Yes all of the shafts back ends that goes into the trigger housing are the same size. the most popular 5/16″ is 36″ to 40″ in length. You can also get 9/32″. Our Tahitian style is in 9/32″ that comes with point and wing.
Thanks for shooting JBL Spearguns.
Dustin says:
Do you make different diameter shafts for the 450xhd? if so what size?
Firefight53 says:
I just bought the lightning 22. Is there a different shaft i can put on it to change out the spear tips?
JBL Hunter says:
Dustin,
You have a option to get a 56″x5/16″ shaft instead of the 3/8″. The part number for that shaft is #756-SA.
JBL International
JBL Hunter says:
Firefight,
You can use the same shaft as the reg Exploror 22 which is part #734-SA. That is a 34″x5/16″ with a 6mm threaded tip. You can put whatever tip you want on it.
JBL International
Jose says:
I would like to know if there is a replacement for the travel magnum shaft?
JBL Hunter says:
Jose,
Part number is #721-S and 7427S.
carlos says:
hey i have a 38 special i wanna go something a little longer and thinner for my shaft what do you have ?
JBL Hunter says:
Carlos,
You can look at the Sawed Off Magnum and use a 9/32″ shaft.
Greg says:
Hi there. I shoot a Gulf magnum xhd. I would like to use a thinner shaft than the 3/8″. I would like to buy a 5/16″ x 48″ . Is this possible? Where can i buy one?
I am residing in the UK so any online store would work.
Thanks
Colin says:
Hey I’ve got a scubapro magnum 45, an old pneumatic gun, but it’s missing the shaft. What would I need to make my setup complete?
JBL Hunter says:
Colin number is #7414-S for a shaft for a Scuba pro Magnum 45.
JBL Hunter says:
You will be fine. You will be able to load it. You can always get longer bands to make the reach easier.
CANADIAN Dustin says:
Hello i’ve owned my Jbl 5′ spear for 13 yrs now and i pulled it out of the closet this year and i need a replacement rubber band where do i purchase one of those. thanks Watsy
Daniel says:
my elite woody sawed off magnum came with the shark fin shaft. I’ve been looking for a spearpoint to add to it, but can’t seem to find one that fits. Besides from the thickness pf the shaft, the grooves seem to be backwards. Is there an adapter that fits this shaft? And where can I order it?
JBL Hunter says:
Daniel,
The adapter that you are looking for is part #815. This is a 5/16mm FM to 6mm Male. You can order from any JBL Dealer.
JBL Hunter says:
Canadian,
You need part number #D6100. You can order from any authorized JBL Dealer.
JBL Hunter says:
Greg,
Yes you can change the shaft to a 5/16″ shaft.
Daniel says:
When I put on the spearpoint, what do I do with the top flopper?